How to configure Nethserver 6.6 after fresh install

March 31, 2015 | By | Reply More

On the previous post, I already shown how to install Nethserver 6.6 from the scratch. After installation finished, we need to configure several things in order to run Nethserver 6.6 properly. Its not a hard task to configure Nethserver. You can do the configuration from other computer on the same network.  Please read the tutorial how to install Nethserver 6.6 first before reading this post.

Make sure Nethserver is up and running. Then open web browser on other computer and type:

https://your-server-ipaddress:980

On the first screen, you will see a login page. Use the default username: root and Nethesis,1234 as the password

nethserver install 10

Next the configuration wizard page will show up

configure nethserver 6.6 tutorial 1

Press Next to continue to the next step. On this step we need to change the root password.

configure nethserver 6.6 tutorial 2

Next is to set the hostname for Nethserver

configure nethserver 6.6 tutorial 3

Set the date and time. Select the time zone from the list.

configure nethserver 6.6 tutorial 4

Configure the ssh port. The default value is 22 you can change this port to other port such as 2222

configure nethserver 6.6 tutorial 5

Select No if you don’t want to use the statistic

configure nethserver 6.6 tutorial 6

Please review the settings before press Apply.

configure nethserver 6.6 tutorial 7

When you press Apply, Nethserver will apply the configuration. When finished, you can see the Nethserver server manager/dashboard where you can access to various settings for your server.

configure nethserver 6.6 tutorial 8

Tags: , , , ,

Category: Server

Leave a Reply